R&S FSP13 Handheld Spectrum Analyzer
main feature
Frequency range 9 kHz ~ 13 GHz
Resolution bandwidth 1 Hz ～ 10 MHz
Average display noise level --155 dBm (1 Hz)
Phase noise --113 dB (1 Hz) at 10 kHz
Other filters:
100 Hz ～ 5 MHz channel filter and RRC filter
FFT filter 1Hz ～ 30 kHz
EMI bandwidth and quasi-peak detector
TOI, MC ACP(R), OBW, CCDF, APD and other measurement functions
Cellular standards and universal standard measurement applications, such as phase noise, noise figure, etc.
Detailed introduction
FSP spectrum analyzer is an ideal partner for R&D and production, with good level measurement uncertainty and excellent RF characteristics. R&S? FSP adopts mature technology to provide the best performance, reliability and service convenience.
Frequency Range:
FSP3: 9kHz (20Hz) ～ 3 GHz
FSP7: 9kHz (20Hz) ～ 7 GHz
FSP13: 9kHz (20Hz) ～ 13 GHz
FSP30: 9kHz (20Hz) ～ 30 GHz
FSP40: 9kHz (20Hz) ～ 40 GHz
RF performance:
DANL typical value -155 dBm (1Hz) without preamplifier
Phase noise typical value -113 dBc/Hz @ 10 kHz deviation, carrier 500 MHz
Typical phase noise-145 dBc/Hz @ 10 MHz deviation, carrier 500 MHz
TOI typical value 10 dBm
1-dB-compression point 0 dBm
Phase noise measurement with R&S FSP
Accuracy:
The total level uncertainty below 3.6 GHz is 0.5dB
Linearity error is less than 0.2dB at -70 dB
Display linearity when resolution bandwidth ≤100 kHz (measured on 30 devices)
IQ down converter:
IF digital converter 12-bit 32MHz (20.4 MHz IF)
IQ memory 2x128 ksamples
speed:
Frequency domain scan time 2.5ms
Time domain scan time 1 μs
Up to 70 remote measurements can be done through GPIB
Up to 80 manual measurements (screen update)
The R&S FSP spectrum analyzer is distinguished by its innovative measurement technology and abundant standard functions.
Various detectors are available
Maximum value, minimum value, automatic peak value, sampling, true effective value, average value, quasi-peak value
CP/ACP/Fast ACP measurement function adopts many predefined standards
Multi-carrier ACP measurement, support independent carrier spacing
ACP/MCAP up to 12 adjacent channels and maximum hold power function
TOI, OBW, phase noise, ACP, AM modulation depth automatic test program
Harmonic distortion measurement
CCDF and APD functions (percentage can be used for the y-axis unit)
Editable limit line, including pass/fail indication
WCDMA signal CCDF parameter measurement
Adjacent channel power measurement in the time domain: fast ACP
Third-order cut-off point measurement
Burst power measurement (above), OBW measurement (below)
AM signal modulation depth measurement
RBW features:
10 Hz ～ 100 kHz digital filter (step value 1, 3, 10)
Analog filter 300 kHz ～ 10 MHz (1, 3, 10 step value)
39 channel filters, ranging from 100 Hz to 5 MHz
RRC filter (IS-136, TETRA, WCDMA)
EMI bandwidth standard
FFT filter 1 Hz ～ 30 kHz
Use digital filter or FFT for 200kHz span sweep time comparison
Comparison of 1 MHz channel filter and ordinary 1 MHz resolution filter
10 dB step attenuator (FSP-B25 is 5 dB)
Electronic attenuator and preamp options
The sensitivity of the IF power trigger can reach – 50 dBm mixer value
Threshold trigger function
Various marking functions can be selected
Phase noise, noise, n dB reduction / n dB increase, peak list, frequency meter (0.1Hz for 30ms)
Internal tracking signal generator supports power sweep
External signal source control (reverse scan)
While the trace display function is activated, the frequency range can be expanded by an external mixer that supports offset tuning
GPIB instruction set is compatible with HP 859x/8566/8591E/71100C/71200C/71209C
GPIB instruction set is compatible with FSEx/FSIQ
GPIB runs extremely fast in list mode words
Ethernet interface (100 Base T)
21 cm color SVGA TFT display
Split screen display mode
Operating system: Embedded Windows XP
Easily generate measurement result documents
Remote desktop function
Compatibility (printer driver, networking, etc.)
Interface: GPIB, RS-232-C, LAN (optional), USB
VXI-11 remote support
A variety of application firmware is available, including 3GPP communication standard code domain power measurement firmware
Bluetooth
GSM/EDGE
3 GPP WCDMA, HSDPA, TD-SCDMA
CDMA2000, 1xEV-DV, 1xEV-DO
WLAN 802.11a (OFDM spectrum limit)
Noise figure and gain measurement
FM/PM/AM measurement demodulator
Phase noise measurement
Power probe measurement supports power probe R&S? NRP-Z11, Z21, Z22, Z23, Z24, Z51, Z55, Z81, Z91, external power meter R&S? NRVD, HP EPM, HP 437B, HP438A and power divider
13590213125
Mail
ChatNow